Product name: | ZDP Series Digital Torque Driver Tester |
Category: | ATTONIC |
Product model: | ZDP系列 |
Product acessories:
main feature:
1. Ergonomic design. The sturdy metal housing structure is reliable and durable.
2. The LCD screen can be flipped to display measurement data and units.
3. Instant tracking test and two peak modes are available.
4. Measurement units Lbf, Kgf(gf), (K)N are available for selection.
5. Programmable high/low value color LED indicators and output signals to indicate pass/fail testing.
6, the instrument can store 1000 data.
7, can be connected to the computer with RS232C or USB interface. It can process 1000 books per second and can generate analysis charts based on statistics.
8, range overload and battery low voltage indication.
9, the LCD screen can display the positive and negative signs, visually showing the loose and tightened state of the screw.
Technical Parameters:
型号 | ZDP系列数显扭力起子 | |||
测量装置 | ±0.2%F.S或±1digit | |||
显示 | 4位元数LCD液晶显示幕装置 | |||
取样速度 | 1000次/每秒 | |||
显示更新 | 10次/每秒 | |||
超负荷容量 | 200%全量程(LED闪烁和嗡嗡声超过110%) | |||
A/D转换器 | 24位元信号 | |||
微处理器 | 8位元1个尖端微处理器 | |||
电池操作时间 | 全部充电可以连续使用大约16小时 | |||
充电时间 | 大约6个小时 | |||
使用温度 | 0︿+40摄氏度 | |||
使用湿度范围 | 20-80%RH相对湿度 | |||
电源 | 内置NIMH 可充电电池 AC适配器 | |||
输出 | USB | Mitutoyo数据 | USB | Mitutoyo数据 |
模拟(-2至+2V) | ||||
系列RS232C | ||||
比较信号(+NG,OK –NG)打开收集器MAX 30V10mA | ||||
超负荷警报信号(OVL) 打开收集器MAX 30V10mA | ||||
峰值保持 | 压力或者拉力,压力和拉力 | |||
比较功能 | 可设定的带颜色LED的高/低设置点 | |||
存储功能 | 1000个数据量值 | |||
显示翻转功能 | 测量值和单位 | |||
报警 | 超负荷和+NG(开/关 可以选择的) | |||
其他功能 | 自动清零(1.0-25.5秒设置)) | |||
阻尼模式(7个水准设置) | ||||
自动切断电源功能 | 5,10,30,60分钟和开关可选择的 | |||
外部连接开关 | 显示保持,清零,以及峰值/追踪选择 | |||
附件 | 6+2个附件 | |||
尺寸 | 长度220.5×宽度78×高度32.3mm | |||
重量 | 大约520g |
Product specifications:
型号 | 最大负荷 | 最小负荷 | ||||
Kgf.cm | N.m | Lbf.in | Kgf.cm | N.m | Lbf.in | |
ZDP-5 | 5.000 | 0.500 | 4.340 | 0.001 | 0.001 | 0.001 |
ZDP-10 | 10.00 | 1.000 | 8.680 | 0.01 | 0.001 | 0.001 |
ZDP-20 | 20.00 | 2.000 | 17.36 | 0.01 | 0.001 | 0.01 |
ZDP-50 | 50.00 | 5.000 | 43.40 | 0.01 | 0.001 | 0.01 |
ZDP-100 | 100.0 | 10.00 | 86.80 | 0.1 | 0.01 | 0.01 |
physical dimension:
Z series host
Sensor unit:
ZDP-5 (H4 adapter)
ZDP-10 or above (6.35mm hex adapter)
Precautions:
1. Read the instructions carefully before using this product.
2. This product is only used for measurement.
3. Avoid misuse or rude treatment.
4. Do not disassemble or damage this product.