Product name: | Z2S-DPU series external sensor push-pull meter |
Category: | ALGOL |
Product model: | Z2S-DPU系列 |
DPU series sensor
use:
1. Simple measurement of the strength of the tension spring and rubber.
2. Measurement of the operating force of the switch button: telephone, computer, remote control.
3. The insertion force and pull-out force of the connector can be tested at the same time.
4. The peak cracking force of new materials such as glass, carbon, ceramics and plastics is captured.
5. Measurement of bending force of thin plates, round bars, wood, etc.
6, peel test: tape, PCB, adhesive tape and other peeling force.
7. Extension test: tensile test of new rubber materials.
8, hardness test: test of cockroach, fruit, lipstick, viscosity.
9, the easy to open cans, cans, etc. when the pull-off peak pull.
10. Tensile strength test: tensile strength and riveting strength test of the terminal.
11, breaking test: wire, copper wire, etc. tensile breaking test.
12, switch contact touch power test: mechanical contact touch test.
Features:
1. Ergonomic design. With a non-slip rubber handle and a sturdy metal casing.
The sensor can withstand 200% overload. The product is reliable and durable.
2. The LCD screen can be flipped to display measurement data and units.
3. Real-time tracking test and two peak modes are available.
4. Measurement units (K)N, Kgf (gf), Lbf (ozf) are available.
5. Programmable high/low value color LED indicators and outputs to indicate pass/fail testing.
6, the instrument can store 1000 data.
7, can be connected to the computer with RS232C or USB interface. It can process 1000 data per second and can generate analysis charts based on statistics.
8. Range overload and battery low voltage indication.
Technical Parameters:
型 号 | Z2S-DPU系列 高性能电子式推拉力计 | |||
测量装置 | ±0.2%F.S或±1digit | |||
显 示 | 4位数LCD液晶显示屏装置 模式-超负荷LED液晶显示屏 比较-LED液晶显示屏(可逆的) | |||
取样速度 | 1000次/每秒 | |||
显示更新 | 10次/每秒 | |||
超负荷容量 | 200%全量程(LED闪烁和嗡嗡声超过110%) | |||
A/D转换器 | 24位信号 | |||
微处理器 | 8位1个尖端微处理器 | |||
电池操作时间 | 全部充电可以连续使用大约16小时 | |||
充电时间 | 大约6个小时 | |||
使用温度 | 0~+40摄氏度 | |||
使用湿度范围 | 20-80%RH相对湿度 | |||
电 源 | 内置 NIMH 可充电电池 AC适配器 | |||
输 出 | USB接口 | Mitutoyo | USB接口 | Mitutoyo |
模拟电压信号(-2至+2V) | ||||
RS232C系列 | ||||
比较信号(+NG,OK,-NG)打开收集器MAX 30V10mA | ||||
超负荷警报信号(OVL)打开收集器MAX 30V10mA | ||||
峰值保持 | 压力或者拉力,压力和拉力 | |||
比较功能 | 可设定的带颜色LED的高/低设置点 | |||
存储功能 | 1000个数据量值 | |||
显示翻转功能 | 测量值和单位 | |||
报 警 | 超负荷和+NG(开/关 可以选择的) | |||
其他功能 | 自动清零(1.0-25.5秒设置) | |||
阻尼模式(7个水平设置) | ||||
自动关机功能 | 5,10,30,60分钟和关闭可选择 | |||
外部连接开关 | 显示保持,清零,以及峰值/追踪选择 | |||
配 件 | 6+2个附件 AC适配器 携带式仪器箱 使用手册 USB连线(选配) CD-ROM驱动程序(选配) | |||
尺 寸 | 长度220.5×宽度78×高度32.3mm | |||
重 量 | 大约520g |
specification:
外置传感器类型 | 量程 | 显示值 | 分辨率 |
Z2S-DPU-2N | 2N(200.0gf) | 2.000N(200.0gf) | 0.001N(0.1gf) |
Z2S-DPU-5N | 5N(500.0gf) | 5.000N(500.0gf) | 0.001N(0.1gf) |
Z2S-DPU-10N | 10N(1.000Kgf) | 10.00N(1.000Kgf) | 0.01N(0.001Kgf) |
Z2S-DPU-20N | 20N(2.000Kgf) | 20.00N(2.000Kgf) | 0.01N(0.001Kgf) |
Z2S-DPU-50N | 50N(5.000Kgf) | 50.00N(5.000Kgf) | 0.01N(0.001Kgf) |
Z2S-DPU-100N | 100N(10.00 Kgf) | 100.0N(10.00 Kgf) | 0.1N(0.01Kgf) |
Z2S-DPU-200N | 200N(20.00 Kgf) | 200.0N(20.00 Kgf) | 0.1N(0.01Kgf) |
Z2S-DPU-500N | 500N(50.00 Kgf) | 500.0N(50.00 Kgf) | 0.1N(0.01Kgf) |
Remarks: Z2, Z2S is not equipped with the connected software, and the external sensor plus protective case is DPU.
型号 | A | B | C | D | E |
DPU-2N | 71 | 57 | 12 | 26 | 32 |
DPU-5N | 71 | 57 | 12 | 26 | 32 |
DPU-10N | 71 | 57 | 12 | 26 | 32 |
DPU-20N | 73 | 59 | 7.5 | 33 | 39 |
DPU-50N | 73 | 59 | 7.5 | 33 | 39 |
DPU-100N | 73 | 59 | 7.5 | 33 | 39 |
DPU-200N | 73 | 59 | 7.5 | 33 | 39 |
DPU-500N | 73 | 59 | 7.5 | 33 | 39 |
Appearance size (Z2S series)
DPU系列称重传感器
DPU-2N~500N
精度:±0.2% F.S. ±1
端子 | 信号名称 |
A | IN+ |
B | OUT- |
C | OUT+ |
D | IN- |
E | - |