Product name: | Z2H large load electronic push-pull force meter |
Category: | ALGOL |
Product model: | ZPH系列/Z2H系列 |
AC adapter
Accessories
Extension rod, small hook, notched tip, pointed tip, pointed tip, flat head
I-1 I-2 I-3 I-4 I-5 I-6
use:
1. Strength test of various materials (tensile test, compression test, shear test, etc.)
2. Measured attraction / electromagnetic or magnetic repulsion.
3. Adhesion test laminated tube.
Features:
1. Digital display tension and compression.
2. Selection of measurement units (kg, nitrogen, pounds).
3. Since the USB output signal is equipped with the ZPH series, it is fast and easy to connect to the computer.
4. Sampling 1000 times per second.
5. Compare function sets the high/low value.
6. Memory function, store data for analysis.
7. Reversible display function.
8. Overload alarm LED and prevention.
9. The cycle is maintained by a push and pull peak.
specification:
型號 | 容量 | 显示 | 解析度 | |
ZPH-1000N | Z2H-1000N | 1000N(100.0Kgf) | 1000N(100.0Kgf) | 1N(0.1Kg) |
ZPH-2000N | Z2H-2000N | 2000N(200.0Kgf) | 2000N(200.0Kgf) | 1N(0.1Kg) |
ZPH-5000N | Z2H-5000N | 5000N(500.0Kgf) | 5000N(500.0Kgf) | 1N(0.1Kg) |
Technical Parameters:
型号 | ZPH | Z2H | ||
单位 | Kgf / N / lbf | |||
显示 | 4位元数LCD液晶显示幕装置 模式-超负荷LED液晶显示幕 比较-LED液晶显示(可逆的) | |||
取样速度 | 1000次/每秒 | |||
显示更新 | 10次/每秒 | |||
超載能力 | 200%全量程(LED闪烁和嗡嗡声超過110%) | |||
A / D转换 | 24位元信号 | |||
微处理器 | 8位元1個尖端微处理器 | |||
精度 | + /- 0.2%F.S.+/ - 1位 | |||
电池使用 | 全部充電可以连续使用大约16小时 | |||
使用温度 | 0~+40摄氏度 | |||
电源 | 內置 NIMH 可充电电池 AC适配器 | |||
输出 | USB | Mitutoyo Digimatic | ||
类比电压信号(-2至+2V)RS232C系列 | ||||
比较信号(+NG,OK,-NG)打开收集器MAX 30V10mA | ||||
超负荷警报信号(OVL)打开收集器MAX 30V10mA | ||||
峰值保持 | “压力或者拉力,压力和拉力 | |||
比较功能 | 可设定的带顏色LED的高/低设置点 | |||
记忆功能 | 1000测量值 | |||
显示翻转功能 | 测量值和單位 | |||
报警 | 超负荷和+NG(开/关 可以选择的) | |||
其他功能 | 自动清零(1.0-25.5秒设置) | |||
阻尼模式(7個水准设置) | ||||
自动开闭电源 | 5,10,30,60分钟和开闭可选择 | |||
附件 | USB线,,驱动光碟 | 6個附件,手柄,安裝螺栓,AC适配器, | ||
外部连接开关 | 显示保持,零清晰,峰值/选择 |
外观尺寸: