DS2 popular push-pull force meter

Accessories

Small hook flat head pointed tip convex tip concave tip extension rod

Ｉ-1（A-1）    Ｉ-2（A-1）        Ｉ-3（A-1）   Ｉ-4（A-1）     Ｉ-5（A-1）  Ｉ-6（A-1）

Remarks: The I series is made of iron and the A series is made of aluminum. A series is recommended for 50N and below, and I series is recommended for 100N-1000N.

use:

1. Simple measurement of the strength of the tension spring and rubber.

2, the operation of the switch button is measured: phone, computer, remote control.

3. The insertion force and pull-out force of the connector can be tested at the same time.

4. The peak cracking force of new materials such as glass, carbon, ceramics and plastics is captured.

5. Measurement of bending force of thin plates, round bars, wood, etc.

6, peel test: tape, PCB, adhesive tape and other peeling force.

7. Extension test: tensile test of new rubber materials.

8, hardness test: test of cockroach, fruit, lipstick, viscosity.

9, the easy to open cans, cans, etc. when the pull-off peak pull.

10. Tensile strength test: tensile strength and riveting strength test of the terminal.

11, breaking test: wire, copper wire, etc. tensile breaking test.

12, switch contact touch power test: mechanical contact touch test.

Features:

1. Stretching or compressing the instrument The measuring axis can display the measured force value digitally.

2. All models of the instrument can obtain the maximum force value in the measurement.

3. When the battery is overloaded or low, the display screen flashes alarm.

4, display flip only one button to perform the operation.

5. Further improved durability and ease of use.

Technical Parameters:

specification:

Appearance size