Product name: | DS2 series external sensor push-pull force meter |
Category: | ALGOL |
Product model: | DS2系列 |
Accessories
Universal joint | U-shaped piece |
use:
1. Simple measurement of the strength of the tension spring and rubber.
2. The insertion force and pull-out force of the connector can be tested at the same time.
3. The peak cracking force of new materials such as glass, carbon, ceramics and plastics is captured.
4. Measurement of bending force of thin plates, round bars, wood, etc.
5, peel test: the peeling force of tape, PCB, adhesive tape, etc.
6. Extension test: tensile test of new rubber materials.
7. Tensile strength test: tensile strength and riveting strength test of the terminal.
8. Breaking test: The tensile breaking test of wires and copper wires.
9, switch contact touch power test: mechanical contact touch test.
Features:
1. Stretching or compressing the instrument The measuring axis can display the measured force value digitally.
2. All models of the instrument can obtain the maximum force value in the measurement.
3. When the battery is overloaded or low, the display screen flashes alarm.
4, display flip only one button to perform the operation.
5. Further improved durability and ease of use.
specification:
外置传感器类型 | 量程 | 显示值 | 分辨率 |
DS2-1000N | 10N(1.000Kgf) | 10.00N(1.000Kgf) | 1N(0.1Kgf) |
DS2-2000N | 2000N(200.0Kgf) | 2000N(200.0Kgf) | 1N(0.1kgf) |
DS2 -5000N | 5000N(500.0Kgf) | 5000N(500.0Kgf) | 1N(0.1kgf) |
DS2 -10KN | 10KN.00(1000Kgf) | 10.00KN(1000Kgf) | 0.01KN(1kgf) |
DS2 -20KN | 20KN.00(2000Kgf) | 20.00KN(2000Kgf) | 0.01KN(1kgf) |
DS2 -50KN | 50.00KN(5000Kgf) | 50.00KN(5000Kgf) | 0.01KN(1kgf) |
DS2 -100KN | 100.0KN(9999Kgf) | 100.0KN(9999Kgf) | 0.1KN(1.0Kgf) |
Technical Parameters:
型 号 | DS2系列 普及型電子外置传感器推拉力计 |
测定單位 | Kgf,N,Lbf或gf,N,ozf切换 |
精 度 | ±0.2%F.S或±1digit |
测定方法 | 跟踪/峰值模式切换 |
显 示 | 4位元数LCD液晶显示幕裝置 模式-超负荷LED液晶显示幕 比较-LED液晶显示幕(可逆的) |
取样速度 | 1000次/每秒 |
显示更新 | 10次/每秒 |
超负荷 容 量 | 最大负荷为10N 以下型号的: 150%(LCD闪烁约110%) 最大负荷为20N 以上型号的: 200%(LCD闪烁约110%) |
测量功能 | 峰值保持 压力或者拉力 显示翻转 测量值和单位 |
比较功能 | 可设定的高/低设置点 |
电 源 | 內置NIMH 可充电电池,AC适配器 |
充电时间 | 大约6個小時 |
使用温度 | 0︿+40摄氏度 |
重 量 | 约420g |
外部连 接开关 | 显示保持,清零,以及峰值/追踪选择 |
配 件 | AC適配器 手提箱 |
physical dimension